Health and Safety Data

1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY/UNDERTAKING

Product name: Cleanitise
Product code: 0008
Company name: Cleanitise Ltd Unit 4, Block C, Kingsbridge Ind Est, Gorseinon, Swansea SA4 4HJ
Tel: 01446 775577
Website: www.cleanitise.com
Enquiries: enquiries@cleanitise.com

2. HAZARDS IDENTIFICATION

Main hazards: Irritating to eyes.
Workplace exposure limit: This substance does not have a wDrhplace exposure limit.
PBT: This substance is not identified as a PBT substance.
Directive 19&9/45/EC: This preparation meets the criteria for classification as dangerous in accordance with Directive 1999/45/EC.

3. COMPOSITION/INFORMATION ON INGREDIENTS

Hazardous ingredients:
BENZALKONIUM CHLORIDE 1-10%
CAS: 8001-54-5
[Xn] R20; [Xn] R21; [Xn] R20/22; [C] R34
• PROPAN-2-OL 1-10%
EINECS: 200-661-7 CAS: 67-63-0
[F]R11; [Xi] R36; [-]R67

4. FIRST AID MEASURES

Skin contact: Remove alI contaminated clothes and footwear immediately unless stuck to skin. 
Wash immediately with plenty of soap and water.
Eye contact: Bathe the eye with running water for 15 minutes. Consult a Doctor.
Ingestion: Wash out mouth with water. Consult a doctor.
Inhalation: Remove casualty from exposure ensuring one’s own safely whilst doing so. Consult a doctor

5. FIRE-FIGHTING MEASURES

Extinguishing media: Suitable extinguishing media for the surrounding fire should be used.
Exposure hazards: In combustion emits toxic fumes..
Protection of fire-fighters: Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions: Refer to section 8 of SDS for personal protection details. If outside do not approach from downwind. If outside keep bystanders upwind and away from danger point. Mark out the contaminated area with signs and prevent access to unauthorised personnel. Do not create dust.
Environmental precautions: Do not discharge into drains or rivers.
Clean-up procedures: Transfer to a closable, labelled salvage container for disposal by an appropriate method.

7. HANDLING AND STORAGE

Handling requirements: Avoid direct contact with the substance. Ensure there is sufficient ventilation of the area. Do not handle in a confined space. Avoid the formation or spread of dust in the air.
Storage conditions: Store in cool, well ventilated area. Keep container tightly closed.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Hazardous ingredients:
PROPAN-2-OL
UK – 8 hour TWA: 999 mg/m3
UK -15 mm. STEL: 1250 mg/m3
Engineering measures: Ensure there is sufficient ventilation of the area.
Respiratory protection: Self-contained breathing apparatus must be available in case of emergency. Respiratory protective device with particle filter.
Hand protection: Protective gtoves.
Eye protection: Safety glasses. Ensure eye bath is to hand.
Skin protection: Protective clothing.

9. PHYSICAL AND CHEMICAL PROPERTIES

State: Solid

10. STABILITY AND REACTIVITY

Stability: Stable under normal conditions.
Conditions to avoid: Heat.
Materials to avoid: Strong oxidising agents. Strong acids.
Haz. decomp. products: In combustion emits toxic fumes.

11. TOXICOLOGIGAL INFORMATION

Acute effects: Irritating to eyes.